LUMEX® A are premium quality amorphous polyethylene terephthalate (A-PET) sheets. They are ideally suited to flat and arched applications. LUMEX® A shows extremely good printability with UV curing inks and is fire rated – ‘difficult-to-ignite‘ and is suitable for use in the food industry. It is also extremely impact resistant even at sub-zero temperatures and shows excellent weatherresistance.

  • On both sides
    (upper side: transparent, printed / lower side: transparent, unprinted)
  • Visual communication
  • windshield
  • shop fitting
  • furnishing
  • noise barriers
  • 100% recyclable within its own waste category 1 (PET)
  • Tough and hard with high impact strength also at sub-zero temperatures down to -20°C
  • Impeccable optical properties with a light transmission of nearly 90% for non-tinted types
  • Good outdoor durability up to 4 years even for standard types
  • Approved by FDA/BGA for direct contact with foodstuff and medical applications
  • Flame retardant rated ‘difficult-to-ignite’
  • Very high chemical resistance against cleaning agents, mineral oils, solvents
  • Easy and fast to convert
  • Good printability thanks to optimal adhesion of UV curing inks
Standard formats ex works
Colour clear-transparent
Thickness 0.8 1 1.5 2 3 4 5 6
Standard formats (W x L)
1250 x 2050 * * * * *      
1250 x 2500         *   *  
2050 x 3050 * * * * *      
2050 x >1000 -6050 mm * * * * * * * *
  clear-transparent ar (anti reflective)
1250 x 2050 * * * *        
2050 x 3050 * * * *   * * *
2050 x >1000 -6050 mm * * * * *      
  opal 30%
1250 x 2050   * * *        
2050 x 3050   * * * *      
2050 x >1000 -6050 mm   * * * * * *  
             white - black / others translucent / others opaque         
2050 x >1000-6050 mm   * * * * * * *
  bronce
2050 x >1000 -6050 mm         * * *  
Tolerances
© 2015 Plexiglas| Values. All Rights Reserved.

Search